Helpful Tip: Try and use a metal tape measure.

1. Measure your window in cm's or inches, whichever you feel comforable with.

2. When taking sizes, start with the width first and then the drop. You may find it easier drawing a rough diagram on paper first.

3 Make sure you are familiar with the way the window operates, if the window opens inward the blind may restrict the opening of the window. So fitting the blind on the outsite of the frame may be a better option.

      
RECESS MEASUREMENT (fitting inside the window frame)

1. All you have to do is measure the exact width across, then the exact drop from top to bottom.

2 Try and measure the width at the hightest point of the window, sometimes the measurement at the bottom is different from the top. The narrowest measurement width is required for the make up of the blind.

OUTSIDE MEASUREMENTS - ( fitting on the outside of the window frame)

1. Measure the outside of the frame, remember the width given will be the total width across including the fixing brackets. For example if a width of 1m is given then an allowance of 25mm will be deducted from the fabric width to allow for the brackets.

2. Measure the outside of the fram for the drop, making sure you allow a little bit extra at the top for the brackets.

Please note: If you are not sure about the best place to install the blinds, just take a picture of the area and we will advise.

All blinds are supplied with all the necessary fittings, we however do not supply screws. Depending on the surface you are securing to will determine the type and size of screw.